Rennline Engine Carrier Reinforcement Gusset Kit - Porsche 89-98 Porsche 964/993 Except Turbos

Weld on - 89-98 Porsche 964/993 All Except Turbos

One of the only weak points on the 964 and 993 chassis is the engine carrier. When these models are tracked, or are fitted with stiffer than stock engine mounts, the engine carrier should be reinforced. If it is not, the carrier is known to bend, crack, or even break cleanly away from an engine mount in response to increased vibration and stress. The Porsche factory was aware of this problem and equipped its race cars with a reinforced engine carrier. Rennline now exclusively offers an engine mount reinforcement gusset kit that can be welded to the engine carrier by your shop.

Not a welder? Let Rennline take care of this for you. Simply send us your motor mount, we will sandblast your carrier, expertly weld on the reinforcement, and will repaint the new carrier to look stock for $325 including the gusset. Send to this address.

Once we receive your mount, a Rennline representative will contact you regarding payment. There is generally a 4 day turn around time once payment is received.

We also offer pre-welded engine carriers depending on availability. Please see below for more details.

Right Click and Save As to view the installation instructions.