Ford Racing 2021 Bronco 17x8.5 Beadlock Gloss Black Sasquatch Wheel Kit - M-1007-DC17A

Availability: In stock
(No reviews yet) Write a Review
Part Number:
FRPM-1007-DC17A
Manufacturer:
Ford Racing
UPC:
756122015285
Availability:
Special order
Weight:
40.25 LBS
Shipping:
Calculated at Checkout
$815.00
Adding to cart… The item has been added
May Qualify for FREE SHIPPING
Description
FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

This Part Fits:

YearMakeModelSubmodel
2021-2023FordBroncoBadlands
2021-2023FordBroncoBase
2021-2023FordBroncoBig Bend
2021-2023FordBroncoBlack Diamond
2022-2023FordBroncoEverglades
2021FordBroncoFirst Edition
2023FordBroncoHeritage Edition
2023FordBroncoHeritage Limited Edition
2021-2023FordBroncoOuter Banks
2022FordBroncoRaptor
2021-2023FordBroncoWildtrak