Ford Racing 15-17 F-150 20in x 8.5in Six Spoke Wheel - Matte Black - M-1007-P2085MB

Current Stock: 2
(No reviews yet) Write a Review
Part Number:
FRPM-1007-P2085MB
Manufacturer:
Ford Racing
UPC:
756122002964
Availability:
Regularly stocked product
Weight:
41.60 LBS
Shipping:
Calculated at Checkout
MSRP: $350.00
$265.00
(You save $85.00 )
Adding to cart… The item has been added
May Qualify for FREE SHIPPING
Description
FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

This Part Fits:

YearMakeModelSubmodel
2015-2017FordF-150King Ranch
2015-2017FordF-150Lariat
2016-2017FordF-150Limited
2015-2017FordF-150Platinum
2017FordF-150Raptor
2016-2017FordF-150SSV
2015-2017FordF-150XL
2015-2017FordF-150XLT